hygger Aquarium LED Light,26W Full Spectrum Plant Aquarium Light with LCD Setting, 7 Colors, Sunrise Sunset Moon and DIY Mode, Programmable Fish Tank Light for Freshwater 46-61cm Planted Tank

hygger 957 Aquarium Light Feature:

Programmable, gradual 24-hour light cycle settings simulates sunrise, midday, sunset, and night.Sunrise & sunset function: a slow, continuous ramp-up from ‘off’ to ‘on’ over a fifteen minute period.Programmable moon light color: full spectrum, red, purple, blue, cyan, green and yellow.Fine tune lighting schedule.Color gradient loop operation.Custom daylight and moonlight time schedule.2 modes available: the default auto cycle and the DIY cycle.Auto ON / OFF: default setting light auto light on at 6:30 am and auto off at 11:30 pm.Ideal for freshwater aquarium and planted tank.

DIY CYCLE

In ‘DIY mode’, you can use eight time slots to create your own custom 24-hour light cycle, adjusting ‘on/off’ and light intensity for each slot. DIY mode L1-L6 slots are full spectrum, while L7 and L8 slots are blue light . You cannot choose colors, you can only alter the brightness at certain time periods.

In order to use DIY mode, the auto cycle must be turned off.To keep a specific time range light out, just set the brightness into 00.

PS: No matter what time you set the end of the night, the lights will not turn off immediately, the fish tank light will turn off completely after 15 minutes. The brightness of the light for these 15 minutes is slowly dimmed until there is no. The purpose is not too scared your fish, not to suddenly turn off the light and not to suddenly turn on high brightness, which will give the fish a buffer stage.

DAY & MOONLIGHT CYCLE

At default auto cycle, you can use daylight and moonlight option to create your own custom 24 hours light cycle, altering auto on /off time, adjusting light color for moonlight option.

Preset lighting auto turns on at 6:30 AM and auto turn off at 11:30 PM. The light can be set to turn on and off at the designated time which allows your fish get some rest at night.

Daylight light color: 100% white full spectrum light. You cannot choose colors or brightness.Moonlight preset color: 100% blue. You can alter light color. It is available in blue, red, green, cyan, yellow and purple.

NOTE:

Restore Factory Default Settings: press up and down button at the same time until ” SOP ” shows up, unplug the adapter jack. Light will restore to factory default setting and auto turn on at 6:30 am.

BRIGHTNESS

There are 10 kinds of brightness can be adjusted, to simulate the effect of sunrise to sunset, and the brightness of the light can be set in different 8 Time Stages, which can realistically simulate natural light. Not only can it brighten the fish, it can also be applied to the growth of aquatic plants and promote photosynthesis.

FINE TUNE LIGHTING

At the daylight and moonlight mode, it can be programmed into fine tune lighting mode.

White full spectrum light with RGB LEDs. The middle arrays of RGB LEDs can be turned into blue, red or green by pressing “light setting” button. This function allows aquarium hobbyists to adjust the best result according to its need.

Reset local time can programmed back to default setting.

COLOR GRADIENT LOOP

At the daylight and moonlight modes, it can be programmed into color gradient loop mode.

Keeps pressing “Light setting” button until lighting mode switch into dark red lighting mode, color gradient cycle begins. The middle arrays of RGB LEDs slow turns from red into purple, blue, cyan, green, yellow to orange, continuous circulation of color gradient.

Warm Tips

The settings are wrong or the settings are confusing, you can restore the factory settings and start over. In the non-DIY mode, long press the up and down keys at the same time for a few seconds, until “SOP” appears, then unplug the power and plug again, it can restore the factory settings.

Product Dimensions ‏ : ‎ 39 x 11 x 6.5 cm; 840 g
Manufacturer ‏ : ‎ hygger
ASIN ‏ : ‎ B0CGRDYQLT
Country of origin ‏ : ‎ China
Guaranteed software updates until ‏ : ‎ unknown

🐠4 Modes: ①Default Mode. L: All-optical + Blue light(can change); Brightness is simulated sunrise to sunset + night effect. ②DIY Mode. L1-L6: All-optical; L7-L8:Blue. The brightness(10 kinds) and time (any time) of each stage(8 stages in total) can be set by yourself. ③Gradient Mode. The brightness time cannot be set. Cycle colors-dark blue, green, purple, light blue, yellow, red. ④All-day All-optical Mode.Can fine-tune the color temperature of RGB light, can not set the brightness and time.
🐠High-quality Light: The color of the fish tank light is all-optical, dark blue, green, purple, light blue, yellow, red, dark red (sign of the start color cycle mode). The light is soft, the color rendering index is close to natural light, up to 89%, protecting eyes and fish, to refuse the discomfort caused by stroboscopic for fish and viewers. Using high-quality 2835 + 5050 model lamp beads, long service life, at least 50,000 hours. And there are 10 kinds of light brightness can be adjusted.
🐠Build-in Timer:The lighting system enables a variety of features such as customizing the intensity and colors of the light, setting up daytime to nighttime schedules, mimics sunrise and sunset, color gradient loop, fine tune lighting schedule, auto on and off, memory function, and much more.
🐠Sunrise & Sunset Functions:Enable the LEDs to be easily programmed to slowly turn on or off in 15-minute which prevents light shock to fish. The white daylight mode blends the white, red, green and blue LEDs together to produce bright light. Moonlight mode provides 6 single-colored ( red, purple, blue, cyan, green, yellow) and 10 levels dimmable options. 1 programmable preset can save customized color combinations and lighting.
🐠Technical Specifications: Aluminum alloy plastic case. ①LIGHT SIZE:45*10*2.2cm. ②APPLICATION: 46-61cm. ③INPUT VOTAGE: AC100-240V. ④OUTPUT VOTAGE:DC15V. ⑥LED QUANTITY:77PCS. ⑦RENDERING INDEX:89. ⑧LUMENS:1290. ⑨Color temp:6500-10000K. ⑩POWER CORD:2.7m.