WinTaim Atomic Clock Movement with 2 set 5-6 inch Clock hands, 43/64 inches (17mm) Axis Length MSF Radio Electric Controlled Clock, Auto Adjust Winter and Summer time

WinTaim Atomic Clock Movement with 2 set 5-6 inch Clock hands, 43/64 inches (17mm) Axis Length MSF Radio Electric Controlled Clock, Auto Adjust Winter and Summer time Clock repair kit: Simple design, easy to use, suitable for repairing, replacing, or making a clock. INSTALLATION TIPS 1. First fix the movement to the main body of the middle case. 2. Install the hour, minute, and second hands parallel to the 12 o’clock 3. Pull out the positioning pin on the back of the movement. 4. Install the battery, it automatically searches for local signals Specifications: DIY WALL CLOCK REPAIR PARTS KITS – Radio Controlled Clock Movement Size: 2.2*2.2*0.74 inch (56*56*19mm) Shaft length : 0.67 inch(17mm) Screw thread length : 0.38 inch (9.7mm) Fit about 7/64 – 13/64 inch (3-5 mm) thickness clock panel. With a hook, golden hex nut, golden metal washer, and black rubber washer. Measure from the center hole of the pointer to the top, HR9943: hour hands 3.7inch (94cm), minute hand 5.15inch (131cm). HR9988: hour hands 5.2inch (133cm), minute hand 6.8inch (175cm). HR9943 Applicable to the panel with a diameter of about 12-14inch HR9988 Applicable to the panel with a diameter of about 16-18inch NOTES: PLEASE FOLLOW THE STEP BY DESCRIPTION! The hour and minute hands have a protective plastic coating that needs to be carefully removed. Be careful not to bend the hands with too much pressure. Please do not use alkaline batteries or rechargeable batteries, or they will damage the movement. Do not tighten the brass hex nut too tight. Press hard to get all clock hands in place. Check if all hands are aligned. Tips: Only could receive UK time, if you are in another country, please search WinTaim on Amazon.de, Amazon.fr, Amazon it, Amazon es. Or you can message us to arrange.

EXCELLENT CLOCK HANDS

Our Clock Hands uses the best aluminum as material. Wear-resistant and more durable than other cheap clock hands.

SMART ATOMIC CLOCK MECHANISM

Our radio controlled clock mechanism could search your local radio waves to adjust the time automatically!

NEVER MISS ANY IMPORTANT SECONDS

DIY your own clock, never miss any important seconds!

RADIO CLOCK MOVEMENT MECHANISM – Auto adjusts time after summer time/winter time. Receiving the local signals could get a more accurate time, and free your hands in every year! (With English Subtitle Video and English Version Digita, Please contact us)
INSTALLATION TIPS – 1. First fix the movement to the main body of the middle case. 2. Install the hour, minute, and second hands parallel to the 12 o’clock, 3. Pull out the positioning pin on the back of the movement. 4. Install the battery, it automatically searches for local signals
DIY WALL CLOCK REPAIR PARTS KITS – Radio Controlled Clock Movement Size:2.2*2.2*0.74 inch (56*56*19mm), Shaft length: 0.67 inch(17mm), Screw thread length: 0.38 inch (9.7mm)，Fit about 7/64 – 13/64 inch (3-5 mm) thickness clock panel. With a hook, golden hex nut, golden metal washer, and black rubber washer.
CLOCK HANDS SIZE – The size indicated in the picture shall prevail, they were made of aluminum, please do not install them with too much pressure or they will be bent, please check the sizes before buying.
Wide Application – DIY quartz wall clock replacement movement parts, suitable for repairing, replacing, or making a clock, most can be applied to cross-stitch, three-dimensional embroidery, craft clock, frameless draw clock, etc.